Angstrom Advanced Nitrogen/Oxygen Generating Plant by Membrane Separation

Angstrom Advanced Nitrogen/Oxygen Generating Plant by Membrane Separation www.angstromadvancedinc.com For more information please call Angstrom Advanced at: 781.519.4765 Request an Estimate Our instruments and plants have been delivered to many renowned organizations

Introduction: In this setup by Angstrom Advanced, compressed air is pumped through a compressor filter, along with polymer membrane filters. Due to variable solubility and proliferation factors, different gasses in the air penetrate the membrane at different rates, allowing for their separation. Based on their diffusion rates, the gasses in the air are then placed into one of two categories: “rapid gas” or “slow gas.” After being compacted and purified (to remove oil, water, and dust), the air will be passed through the membrane in order to create a separation of the gasses. The “rapid gasses,” oxygen, carbon dioxide, and some vapors, will be the first to infiltrate the membrane wall, and exit through a discharge port via air pressure. Because nitrogen is characterized as a “slow gas,” it will flow from the gas collector at the end of the pressure box, and finally enter a buffer tank where it will be stored.

Specifications:
Nitrogen Production	1-1000NM3/H
Nitrogen Purity	>95-99.9%
Dew Point	≤-40°C
Work Pressure	0-2.0 Mpa

Angstrom Advanced Nitrogen/Oxygen Generating Plant by Pressure Swing Adsorption

Angstrom Advanced Nitrogen/Oxygen Generating Plant by Pressure Swing Adsorption

www.angstromadvancedinc.com

For more information please call Angstrom Advanced at: 781.519.4765

Request an Estimate

The Angstrom Advanced PSA Nitrogen/Oxygen generator gets N2 / O2 by pressure swing adsorption principle at normal temperature using clean compressed air as raw material and carbon molecular sieve as adsorbent. Because of the different adsorption of oxygen and nitrogen on carbon molecular sieve surface as well as different diffusion rate through the open/close of program control valve; separation of oxygen and nitrogen is achieved and N2 of required purify is created.Our instruments and plants have been delivered to many renowned organizations.  Our instruments and plants have been delivered to many renowned organizations Specifications N2 capacity 1-2000 Nm3/h N2 purity % >95-99.999% O2 capacity 10-500 Nm3/h O2 purity % >95-99.9% Dew Point ≤-40C Transmittance Accuracy ± 0.5%T Transmittance Repeatability 0.3%T Stray Light < 0.2%T (NaNO2)

Angstrom Advanced Liquid Nitrogen / Oxygen / Argon Plant by Cryogenic Technology

Angstrom Advanced Liquid Nitrogen / Oxygen / Argon Plant by Cryogenic Technology

For more information please call Angstrom Advanced at: 781.519.4765

www.angstromadvancedinc.com

Request an Estimate

Introduction:

Angstrom Advanced Liquid Nitrogen / Oxygen / Argon Plants by Cryogenic Technology are top of the line systems. Our generator applications cover a range of production rates depending on the settings employed: Oxygen: 5~10,000L/H, Nitroge: 5~10,000L/H, and Argon: 1~500L/H. The Cryogenic Engine by Angstrom Advanced features Fully Automatic G-M cold head with integral controls. It also includes high efficiency frequency drive with water cooling or optional air cooling. Fully automatic programmable logic controls (PLC) provide many features and modes including auto start, timed run, auto purge, etc. At the time of the order, an Optional Chiller can be attached to liquefier unit to allow continuous operation up to 45°C. The output purity of each gas generated from the plant are as follows: Nitrogen-99.9999% Oxygen -99.95% Argon- 99.9999%.Our instruments and plants have been delivered to many renowned organizations. Our instruments and plants have been delivered to many renowned organizations

Specifications:
Capacity	5-10,000L/H
Purity	>99%
Input Air Pressure	0-2MPa
Working Pressure	0-2MPa
Temperature	-195°C
Power Supply	AC 220V/50Hz, 110V/60Hz